SFF Committee documentation may be purchased in electronic form.
     SFF specifications are available at ftp://ftp.seagate.com/sff



                                   SFF Committee

                             SFF-8156 Specification for

                          54mm x 39mm SSD w/SATA Connector

                                       Rev E 



    Secretariat:  SFF Committee

    Abstract:  This specification defines the 54mm x 39mm form factor and 
    connector position for drives with the standard SATA connector. This form 
    factor is targeted for, but not limited to, solid state drive (SSD) 
    applications. The form factor is essentially a shortened 1.8" form factor 
    with reduced area and the standard SATA connector located on the 54mm side. 
    Mounting features are defined as mounting holes through the drive substrate 
    that have a specific relationship to the connector mating interface and form 
    factor. Variations include mounting options from either the front or back 
    side of the drive substrate.



                 This specification Expired because the 
                 content has been published by JEDEC as 
                 MO-297A Slim Lite SSD Assembly  5/2009